Order Can Am Dual Battery Kit Right Now Online

Good to know: with 18 additional amp hours, long rides feel different for lights and sound. More capacity means longer accessory runtime while safeguarding the starter.

A purpose-built 80A isolator links both batteries Key ON and isolates the starter Key OFF so accessories pull from the second battery. A heavy-duty mount resists vibration and impacts for true off-road service.

Arrives fresh, sealed AGM and fully charged with hardware sized for your specific vehicle. The toy Can-Am defender setup needs no daily maintenance, and a quality maintainer is advised to limit sulfation and extend service life.

Shop online for clear fitment and fast delivery so a customer can move from order to install with minimal downtime. You keep stock starting capacity and gain usable amp-hours for winch, lights, and audio everywhere you ride.

Why a Can-Am Dual Battery Kit Makes Sense for Your Next Ride

For long nights of lights and music, a dedicated auxiliary source keeps the starter ready when you need it. With an 80A isolator, Key ON combines sources; Key OFF isolates the starter so accessories draw from the auxiliary battery.

Run accessories without draining your stock battery

Run light bars, audio, GPS, and cabin heat while keeping the starter untouched. The accessory supply supplies steady voltage for sensitive electronics, reducing dimming and voltage dips when loads spike.

Confident starts thanks to preserved stock starting power

An isolator-managed system preserves the stock battery so cranking stays strong after long accessory use.

• Extra reserve: The auxiliary cell adds amp-hour reserve for high-draw gear on trail or at camp.
• Reduced strain: Accessory offload eases stress on starter circuits and components.
• Automatic management: No manual switching required—system behavior is automatic based on key position.

Can Am dual battery kit Features and Benefits

This section highlights the practical advantages of the upgrade for trail use and everyday reliability. It combines automatic management, rugged mounting, and sealed cells so electronics run without risking the starter.

With an 80 amp isolator, sources link Key ON and the starter is isolated Key OFF. Automation prevents accessory drain on the starting battery.

Rugged mounting bracket for vibration and hits

Reinforced brackets keep components anchored over washboard and landings. It resists loosening/fatigue so your install stays neat and serviceable.

UTV Stereo Platinum Series AGM: sealed, maintenance-free, long-lasting

Platinum Series AGM comes fresh and pre-charged. Sealed AGM means spill resistance, vibration toughness, and no routine maintenance.

Adds extra amp hours vs stock for lights, audio, and accessories

• About +18 amp-hours vs stock for longer light/audio runtime.
• Cleaner under-load voltage preserves sound quality and lamp brightness at idle.
• Factory-friendly integration keeps installs neat and durable.

Fitment & Options for Can-Am Models

Select the kit that matches factory mounts and wiring for your model.

Can-Am Maverick X3 owners can choose a full second-battery kit with all wiring/hardware for turnkey install. If you already own an AGM, the mount-only option from UTV Stereo provides a neat bracket for a tidy install.

Maverick X3: complete 2nd battery kit and dual battery mount

Choose the full kit for speed or go bracket-only if you’re reusing a battery. Both approaches aim for a factory look and secure fit.

Defender: model-fit second battery kit for stock bay

Defender kits fit stock space and preserve access for service. You maintain factory clearances and gain dependable auxiliary capacity.

Bracket-only and wire kit options if you already own an AGM battery

Save by using a wire-and-mount package if you already have a battery. This solution delivers professional routing and solid mounting without extra parts.

Alternatives: DS18 wire/bracket-only and AKJ Offroad solutions

• Explore AKJ Offroad for another full package option.
• DS18 offers a wire/bracket-only package and advertises free shipping on U.S. orders.
• Engineered to model geometry for factory-style, trail-secure installs.

Pick what fits your build—complete kit for convenience or modular parts to reuse gear. Clear fitment guidance cuts wrong orders and gets you the right parts first try.

In the Box: What You Get

A solid parts list shows exactly what arrives with your purchase and how each piece protects starting power while feeding accessories.

Choose a full package with a secondary agm battery or select the bracket-only route if you’ve already got a compatible battery. Either way preserves the starter and adds usable capacity for lights, audio, and recovery tools.

Core components

• An 80 amp battery isolator relay module to manage charge flow between sources.
• Harness, model-specific, to simplify wiring and speed install.
• Power distribution hardware with fused connection points for clean accessory feeds.
• A reinforced bracket that secures the assembly against vibration and impacts.
• Documentation that guides harness routing and proper distribution termination.

Item	Role	Benefit
Secondary AGM cell	Adds capacity	Keeps starter ready while running accessories
80A isolator relay	Manages charge and isolation	Stops accessory drain on starter
Model harness	Wiring link	Simplifies install and service access
Distribution block & hardware	Clean accessory feeds	Tidy fused circuits for lights/audio

All parts are selected for off-road use and sealed where needed to resist dust and moisture. Integration with existing charge/accessory circuits keeps routing tidy and reliable.

Straightforward Installation

Install is straightforward so your rig stays trail-ready with minimal downtime.

Begin with a clean workspace and lay out labeled parts. Mount the bracket, place the second cell, and route the harness to labeled terminals.

Simple Key ON/Key OFF behavior

With the key ON, the 80A isolator links sources; key OFF keeps the starter isolated. This isolator design allows isolate new accessory loads so your starter stays reserved after long stops.

Solid bracket placement with tidy harness routing

Follow factory paths, use clips, and add abrasion sleeves at pinch points. Supplied hardware enables clean grounds and fused feeds—avoid daisy-chains.

Step	What to do	Reason
Mount bracket	Bolt into reinforced points	Maintains clamp load under vibration
Place 2nd cell	Seat battery and clamp firmly	Keeps terminals safe and serviceable
Connect harness	Follow labeled leads and fuse points	Simplifies future upgrades and diagnostics

Most DIYers can complete the install with basic tools. Properly rated isolator and cables stabilize delivery and protect the starter on extended rides.

Charging, Performance, and Long-Term Maintenance

Steady power keeps aftermarket UTV electronics performing under heavy loads. Routine care and proper charging make performance repeatable each season.

Look for steadier voltage and better results with amps, winches, and powerful lights. A dedicated auxiliary AGM reduces spike-related dips, keeping audio clean and lights bright.

Use a charger/maintainer to prevent sulfation

Regular charging with a quality maintainer prevents sulfation, which is the leading cause of capacity loss in agm battery designs. UTV Stereo advises between-trip top-offs to preserve capacity and extend life.

• Key OFF isolation preserves stock battery health.
• Running engine alternator replenishes reserves for efficient recharge on long rides.
• Sealed, vibration-resistant AGM design curbs damage over rough terrain.

Area	Benefit	Action
Performance	Steadier voltage under load	Add a secondary AGM to support high-draw gear
Charging	Lower long-term capacity loss	Employ a quality charger/maintainer between outings
Long-term care	Longer service life	Pair sealed cells with routine maintenance charging

Tip: Have a compatible maintainer ready to keep batteries topped. This reduces surprises and preserves morning starts trip after trip.

Shipping, Support, and Ordering in the United States

Reliable, fast shipping keeps upgrades on schedule so you can plan install day confidently.

Fast U.S. shipping plus order support on current inventory

Fast U.S. shipping helps you upgrade your Can-Am quickly. DS18 advertises free shipping on qualifying U.S. orders to speed delivery on lighter packages.

• Responsive support confirms fitment, inventory, and the correct kit for your vehicle.
• Order full kits or go modular with bracket-and-wire options.
• Lots of bundles include distribution points, reducing parts hunting and speeding installs.

Clear product content and documentation help customers prepare tools before the kit arrives. Domestic fulfillment trims transit time to keep your schedule on track.

Area	Coverage	Benefit
Shipping	Fast domestic transit, DS18 free shipping on select orders	Reduces downtime and gets parts to your garage sooner
Support	Fitment checks and order status for customers	Prevents wrong orders and speeds a correct install
Product options	Full kit or bracket-only/wire-only choices	Match solution to power goals and budget

Conclusion

If you want steady power and an easy install, this second source delivers. With a Platinum Series AGM and 80A isolator, you gain ~18 amp-hours over stock while keeping the starter safe.

Select complete kit or bracket-and-wire to fit your budget and schedule. Amp-rated isolation, fused distribution, and tidy harnessing make add-ons simple and reliable.

Expect improved charging behavior, stronger light/accessory performance, and fast U.S. shipping with friendly support. Pair your auxiliary AGM with a maintainer to preserve lifespan between outings.